The subject of EBM® technology as claimed:

Heavy, industrial standard motor using unconventional fuel to drive

generator or any other industrial machine.

Full compatibility with existing industrial solutions.

Low running cost: Full automation, no fuel cost and low maintenance fee.

High reliability, zero emission and zero environmental impact.

Fast investment return.

Description of the machines:

The EBM machines are heavy powerhouses.

The mass of them are performance related.

The active mass of the 1,5Mw(e)* version is over 80 Mt.

The construction of the machine is confidential.

Some details are published under: www.gammamanagements.com

It runs in self sustaining mode when reached the nominal rotation.

For start up conventional starter motor has to be applied

driven by any kind of conventional fuel.

The business opportunity:

EBM® technology offers different business prospective.

- Direct investment into the mother company

- Long term partnership based on joint-venture

- Shared ownership of the technology and/or machines

- Venture capital for further developments

- Licenses for certain market coverage

- Purchase of rights, brand or some part of the technology

- Further business proposals could be considered.

Description of the EBM(R) technology

1. Basic principle

Symmetry is one of the fundamental properties of nature. It is an attribute of matter and energy securing the balance of the nature. Destroyed symmetry is equal to space time distortion which awakes cosmic forces of restoration. Like a waterfall which can not reach equilibrium so is the energy flows as long as the gap in energy levels exists. Distorted symmetry is the tap which opens the flood gate of the hyper space to seal up the boundaries of our 3D environment.

EBM® technology is based on this phenomena: Dynamic distraction of symmetry of internal energy fields within a motor or generator type of machines. The repeatedly disrupted symmetry attracts the flux of healing energy resulting extra momentum on the shaft of the motors or extra electric power and heat on generators.

2. The simulation

Manipulate the symmetry of the working magnetic field in 3D environment is a new approach in Electro-Mechanics. Classic physics and mathematics are not fully applicable to describe it. However convergence of the solution of the related differential equations early suggested the possibility of power gain from Electro-Magnetic fields according to Prof. L.I. Szabo,

the father of EBM® technology. The classical Electro-Mechanics has no room for this

suggestion so a set of new principles with higher level of freedom were implemented.

3. The realization

The basic know-how is the way to recreate or restore the asymmetry of the dynamic magnetic

fields within the machines. The recreated asymmetry secures the influx of external

energy, resulting virtually excess power there. Being a geometric type of device the dimensioning is crucial.

(The function is analogue to Chinese Chi-Kong when Chi takes over the action of the body

after initial exercise, providing seemingly endless endurance to the performer. )

4. The technology

A rotating Electro-Magnetic machine of special design is built to provoke the influx of

balancing energy to restore the symmetry of the internal magnetic fields.

As the restoration continues, the energy flux will be permanent during the operation

of the machine. The energy gained appears in a form of extra momentum, heat or

electricity than. This is the technology of clean, harmless, noiseless and virtually free

energy generation. This is the soul of the revolutionary EBM® technology.

5. The background

It took more than 20 years for a skillful team of developers to reach the presented results

under the leadership of Prof. L. I. Szabo. Over hundred machines of unique constructions were designed, built and tested for a great cost. The best design was scaled up several times to increase the portion of the power-gain.

The scale up has proved that the efficiency was proportional with some key section sizes of the machine and with the active volume of the ferromagnetic material built into it. Thousands of carefully set up test cycles have proved this fact on several machines during the last seven years at different location with different sets of calibrated instruments.

6. The construction

Larger scale of distortion of inner magnetic field at larger section of the machine results greater overall efficiency as expected. Based on this a set of design rules were created to predict the level of power gain as a function of geometry. Using those design rules it was established that the winning design reaches self sustainability at about 1Mw(e) capacity.

Over this critical size all machines expected to run in self sustaining mode providing sellable energy according to their nominal capacity.

7. Investment guide

The exclusive owner of the EBM® technology has set the terms of implementation of the technology region by region. The terms are simple and fair, but subjects of face to face

negotiations. As a basic investment rule, the cost of the hardware is about 3-4 Euro/Watt

of sellable Electro energy. The investment return is extremely fast due to the savings on

the fuel. The designed power range is 1,5...225Mw per unit at 50 to 400Hz cycle rate.

Further investments or venture capital is required for project realizations.

8. Demonstration facility

The exclusive owner of the technology runs a test and presentation site with 3 working

models set to prove the effect described above. The installed machines of 1- 10 tons work in

generator mode on the power level of 1-50kw respectively. The power-gain for example

at about 25kw input level is a significant 10kw on the top of the input power providing compelling evidence for all. The facility serves visitors based on individual contracts.

9. Prospective

EBM® technology is the only known today technology promising realistic potential to provide clean and cheap energy of industrial magnitude. It is free from harmful materials and exhaust products, it is green, clean and quiet. EBM(R) technology is on the move to revolutionize the power industry. The task now is to scale up the operation.

10. Present stage of development

EBM® technology is ready for wide range of implementations. The design of machines for different power level is completed. The technical documentation is ready for pilot production

of wide range of machines.

Resume:

The EBM® technology is a proven concept of generating mechanical, Electro and Heat energy without a consumption of any kind of conventional fuel. EBM® machines are driven by the energy of outer Electro-Magnetic spin fields. The financial and environmental benefits of this technology are obvious. The technology is ready for implementation at any place for any purpose at any time. As an investment, the possibilities are enormous. Further information and supplement materials are available by request.

Tibor.Kiss June 2007

All rights reserved

* Mw(e) is the generated Electro energy only, excluding the generated Heat energy